BenQ TK710STi Review for Golf Simulators and Movie Nights

The BenQ TK710STi is a good candidate when your golf simulator room also has to be the family movie and gaming room.

It brings a 4K image, a laser light source, short throw, and an Android TV dongle.

I would not choose it just because it has a gaming badge.

A golf simulator still needs the right throw distance, enough light on an impact screen, and a safe place for the projector.

The clearest tradeoff is brightness.

Its 3,200-ANSI-lumen rating sits below BenQ’s 4,000-lumen golf-focused AK700ST.

In a room you can darken, that may be fine.

In a wide, bright bay, the missing light output could matter more than the built-in entertainment features.

The Golf Setup Starts With Geometry

BenQ’s TK710STi specifications show a 0.69–0.83 throw ratio and 1.2× optical zoom.

For a ten-foot-wide image, the lens-to-screen estimate is 6.9–8.3 feet.

That is a useful short throw for a home simulator, but it is only one part of the room measurement.

Mark where the ball will be, then where the lens would sit.

Make full swings and watch whether the golfer can cast a shadow into the projected beam.

Check the ceiling mount against driver clearance, screen movement, and the height of the picture.

A projector can calculate perfectly for screen width and still be impossible to mount safely where the golfer stands.

Offset Matters at the Ceiling

BenQ lists a 102.5% projection offset and three-dimensional keystone adjustment.

It does not list optical lens shift.

The lens position therefore matters more than on the LK936ST or LU935ST.

I would use zoom and a square mount first, then modest digital correction if needed.

Heavy keystone can soften some of the 4K detail.

Its 4K Picture Needs a Capable Source

The projector displays 3840 × 2160 pixels.

That can make a large course image and small menus look sharper, provided the simulator software and graphics card can render at 4K smoothly.

It is not enough for the projector alone to support the resolution.

A weak PC may force lower graphics settings or frame rate, leaving less benefit than the spec sheet suggests.

The TK710STi’s gaming modes and low input-lag options are useful for console play.

Golf simulator responsiveness also depends on the launch monitor reading the shot, the computer processing it, and the software drawing the next frame.

Projector input lag is only one part of that chain.

BenQ lists 16.7 ms for 4K at 60 Hz, but I would not promise any particular ball-to-screen delay from that number.

Streaming Does Not Run the Simulator

The included QS02 Android TV dongle is a convenience for streaming movies and television.

It does not run your golf simulator software or replace the launch monitor and PC.

A clean dual-use room may need both the streaming input and a wired PC connection planned from the start.

Sound Needs Its Own Plan

Audio deserves the same early planning.

BenQ lists a five-watt built-in speaker and HDMI audio return support.

The speaker may be enough for setup sounds, but a family room that doubles as a movie space will likely benefit from an external audio system.

Plan where the receiver or speakers will live and keep the audio wiring clear of the hitting area.

The Android TV dongle, PC, and any game console may each need a suitable input or switching arrangement.

Brightness and Aspect Ratio Set the Limits

At 3,200 ANSI lumens, this model can work well in a controlled home room.

It is less forgiving of windows and bright fixtures that hit the screen.

An impact screen is not a dedicated theater screen, and a very wide image spreads available light.

If the family will use the room during the day, I would work out window coverings and lighting zones before assuming the TK710STi is bright enough.

Its native image is 16:9.

Many simulator enclosures are taller, closer to 4:3 or 16:10.

A mismatched picture may leave unused space or require the PC and projector to scale the output.

That is manageable, but it should be an intentional choice.

A smaller, well-controlled image often looks better than a larger one stretched into a bright room.

Choose by the Room’s Main Use

For a room that serves several purposes, I would write down which compromises are acceptable:

• For simulator golf, check screen width, ball position, beam clearance, and whether the PC can output 4K.
• For movies and sports, check window control, seating distance, screen shape, and external audio.
• For console games, check HDMI inputs, frame rate, and whether game mode looks better to you than the more natural picture mode.

That short exercise stops the entertainment features from hiding an awkward golf installation.

It also makes clear when a golf-focused projector with more light would serve the room better.

BenQ rates the laser for 20,000 hours.

For a room used for golf, sports, and movies, avoiding routine lamp changes is attractive.

You still need access to the mount, ventilation, and a sensible way to route HDMI and power where they cannot be hit or tripped over.

Should You Choose It Over a Golf-Focused BenQ?

Shop Indoor Golf listed the TK710STi at $2,199 on September 16, 2026.

The AH700ST was listed only $100 higher and has 4,000 lumens, but it displays 1080p.

The AK700ST costs more and combines 4K with 4,000 lumens and Auto Screen Fit.

Those are real choices, not just a ladder of better specifications.

I would pick the TK710STi when the room can be darkened, 4K movies and console games matter, and the golf screen can be filled from a straightforward central mount.

I would choose AH700ST if daylight practice and price matter more than 4K.

I would choose AK700ST for a brighter dedicated golf bay with a large screen and a PC that can make good use of the extra pixels.

The TK710STi is a shared-room choice.

If golf is the only reason for buying a projector, compare its lower brightness with the AK700ST before paying for the streaming package.

If the family will use the room as often for films and gaming as for practice, its broader feature set has a much clearer job.